VANCOUVER ISLAND WINDTALK

Hi. I am looking for some old carbon fibre windsurfing masts. I will not be using them for windsurfing, it is for a DIY project to connect to two canoes together in a catamaran. I will likely be cutting them down to about nine or 10 feet so it’s OK if the ends are damaged. I just need a strong pole that is light.

If you’ve got anything collecting dust in your garage please let me know.

Thanks!

One piece (15’) carbon masts were rare and now are likely history. Usually the 2 pieces are rarely 8’ long each so you may need to look elsewhere for 10’ pieces

I have a top half that measures 6’7” if you are interested

Monkeymike, What brand of top section is it? And how much carbon? I am looking for old Sailworks, Technofibre and Powerex SDM (Standard Diameter) mast top and bottom sections. I'll consider paying for them to especially if they are high carbon content. PM me if yours is too short for Pazuzu. And you want to unload it.

Cam R.
Nanaimo

monkeymanmike wrote: Tue Jul 29, 2025 11:20 am I have a top half that measures 6’7” if you are interested

Thanks. I think that’s gonna be too short for me. Hopefully someone else can find a good use for it.

I’ve got an old fibreglass mast full length with one end damaged. PM me if you’re interested. I’m in North Cowichan

Hiyo and Monkey Mike. I am still interested in your mast parts, if they are old Standard Diameter type pieces. If you have pictures or brand details or diameter details on the ferrels plz let me know. I am in no rush..

I would inspect when pass thru your areas in the future.

Cam R.
Nanaimo & W. Van